The use of either AS/NZS 3439 or AS/NZS 61439 for low voltage switchgear and control gear assemblies has been extended until 25 November 2022.

Queensland electrical contractors must ensure installation criteria for switchboards are met before they are installed. Similarly, suppliers of switchboards must ensure sale of equipment criteria for switchboards are met before they are sold.

Both AS/NZS 3439 and AS/NZS 61439 series of standards are referenced in the Wiring Rules, meaning either standard can be used to comply with installation requirements.

AS/NZS 3439 was superseded by AS/NZS 61439 on 24 May 2021, five years after the latter was published, to allow switchboard manufacturers time to update switchboard equipment to the new standard.

MORE FROM MEA

• How a typo can cost you millions
• Contractor fined after sparky did not install MEN
• Revised Standard for solar installation released

Since May, both standards have applied and this decision simply provides further time for the full transition from AS/NZS 3439 to be effected.

MEA has been in discussion with the Electrical Safety Office on behalf of electrical contractors advocating for this extension.

As both standards are still referenced in the Wiring Rules, the ESO is extending the use of AS/NZS 3439 as an alternate equipment standard to AS/NZS 61439 until 25 November 2022. This extra year will allow discussions to continue between stakeholders and Standards Australia to confirm the appropriate safety standards for these switchboards.

During the transition period, ESO will not prevent switchboards compliant to AS/NZS 3439 being sold, unless specific safety issues are identified.

Suitable evidence of compliance for an electrical contractor or electricity entity would be a declaration by the switchboard manufacturer/importer that they have a test report or compliance folder proving the switchboard complies with AS/NZS 3439 or AS/NZS 61349.

Electrical contractors must install according to the manufacturer’s instructions and the Wiring Rules.

Repairs, alterations, or additions to existing switchboards (by adding components or parts), is not considered sale of a new switchboard. Adding a complete self-contained prebuilt switchboard module, however, is considered sale of equipment.

Master Electricians have free, unlimited access to 21 Standards and the MEA Technical hotline. If you need assistance with the Standards, speak direct to the experts. Phone 1300 889 198.